Common iRobot faults
The Clean Base won’t empty the bin. On many iRobot models with auto-empty, large debris in the base’s air path is a known cause. A torn seal between robot and base can do it too. Why it won’t empty
It won’t dock. A dirty charging contact or a covered beacon can leave a Roomba circling its home. Why it can’t find the dock
It sits on the dock but won’t charge. Dirty contacts are the first suspect, and a worn battery is next. Check the charging
It dies mid-clean. A battery that has lost capacity over the years can’t finish a run. Is it the battery?
The brush has stopped. Hair around the bearings or a failed motor can stop the roller. When the brush won’t turn
Repair or replace?
Most Roomba faults are about parts that wear, get clogged or get coated in dust, and those are usually worth sorting out. A seal or air-path fault on the base is a good example.
Where it gets harder is a very old, basic model with a worn battery and something else broken as well. Then replacing it may be smarter. We’ll give you our honest view either way.